For over 20 years, Sika has been providing specialised vehicles, bus and coach, automotive, truck and rail OEM assembly lines with adhesive and sealant solutions for sealing and direct glazing. Primerless, manual and automated pre-treatment options are available to fit the needs of a variety of OEM application processes in order to create significant cost savings and manufacturing process simplification. Sika offers a wide range of adhesive and sealant technologies to suit all direct glazing and sealing applications. Specific Sikaflex solutions are available to suit cold, warm and hot application processes. Proprietary Sikaflex? materials are capable of retaining the glass in position following installation, allowing for elimination of secondary clips, fixings and tape. Sikaflex materials can also provide low electrically conductive properties for elimination of galvanic corrosion. The SikaTack?-Plus Booster range provides the ultimate solution for OEM’s seeking excellent mechanical properties with the shortest possible full cure time. Unlike traditional two-component systems, this boosted one-component system has the significant benefit of full material cure irrespective of the presence of the accelerator paste, providing enhanced process/quality consistency and security. Sikaflex PUR-Hybrid technology (STP-technology) combines the performance of traditional Sikaflex polyurethane systems, but shows additional characteristics such as reduced substrate surface preparation and improved ecological benefits. | |  Transportation Industry
Specialised Vehicles
Structural Bonding and Assembly
Direct Glazing and Sealing
Download Brochure
|
 |
Sikaflex-221 |
|
High-quality multi-purpose sealant and adhesive, suitable for making permanent elastic seals of high adhesive strength |
|
PDS MSDS |
|
|
Sikaflex-222 UV |
|
UV-resistant, ideal for use with organic glass or open joints; easy application; suitable for bonding andsealing; compatible with PC (polycarbonate) and PMMA
(polymethylmetacrylate) with proprietary Sika surface
preparation system; high elasticity and low modulus
|
|
PDS MSDS |
|
|
Sikaflex-250 PC |
|
Warm applied system; high green strength enables reductionin clips, fixings and tape; good tooling behaviour; widely OEM approved; excellent adhesion characteristics |
|
PDS MSDS |
|
|
Sikaflex-265 |
|
Suitable for both bonding and sealing applications. Extremely easy to use, solventfree, with large gap filling capabilities. These lead to excellent aesthetics with a smooth surface finish. The rail industry standard direct glazing adhesive |
|
PDS MSDS |
|
|
Sikaflex-521 UV |
|
Joint sealant with excellent UV, ageing and weatherresistance, reduced substrate surface preparation needed. Solvent and VOC-free |
|
|
Sikaflex-555 |
|
STP direct glazing adhesive and sealant. Suitable alsofor open joints |
|
|
SikaTack-Plus Booster |
|
Fast curing; ‘fail-safe’ systems cures even in theabsence of Sika Booster Paste; good mechanical properties and adhesion |
|
| | |
