Exterior walls and building facades face a huge amount of stressors and carry a big responsibility. They must keep out the rain, cold or heat, while insulating the building interior and keeping the occupants comfortable. Because of all these factors, facades are a primary focus area to design or renovate well in order to ensure building energy efficiency and long-term aesthetic beauty. ETICS systems by Sika ThermoCoat® are able to substantially reduce heating or air conditioning costs and improve the climate inside the building.
¹Source: European Commission
Traditional Facade Renders/Mortars
Typical Application of Facade Renders
SikaWall® facade renders have three main functions:
- Substrate preparation and leveling (covering
- Protection from climatic conditions (insulate, waterproof, etc.)
Facade renders can be applied on concrete, masonry or wood facades in typical applications. The amount of layers may differ, depending on the chosen system, aesthetic requirements and market maturity level.
- Thick layer – leveling and finishing, e.g. "monocouche" (through-colored mortar)
- Thin layer – finishing, e.g. skim coating, acrylic renders
Thermal Insulation Facade Mortar Systems
Also known as exterior thermal insulation composite system (ETICS), exterior insulation finishing system (EIFS), insulated concrete formwork (ICF) or thermal insulation render (TIR), thermal insulation facade mortar systems have a different name around the world. However, one aspect is universal - one of the key factors to achieving energy efficiency in construction projects is the thermal insulation.
The improvement of thermal insulation of a building facade can lead to energy savings of 30 – 35% or more by decreasing the energy consumption needed for heating and cooling and consequently to a lower carbon footprint. An exterior thermal insulation composite system is extremely suitable for new construction and renovation of buildings. There is no need to undertake work in the interior nor oblige the occupants to move temporarily.
Key Advantages of Thermal Insulated Facade Systems
- Suitable for new construction and renovation projects
- Fast and easy to apply
- More durable protection of the building from weathering and atmospheric pollutants
- Reduce utility bills on average by 35%
- Reduce a building’s carbon footprint and improve its energy efficiency rating
- Keep a building warmer in winter and cooler in summer
- Prevent internal condensation leading to mold
- Reduce noise from outside
- Can help to increase property value
Thermal Insulation Facade Mortar Systems Consists of Three Main Technologies
ETICS (exterior thermal insulation composite system) or EIFS (exterior insulation finishing system) is a mineral or organic based exterior wall insulation composite system used to insulate and protect exterior facades.
ICF (insulated concrete formwork) is a construction method using EPS insulation as a permanent formwork, which acts as an insulated skin on the building. This skin needs to be finished with a decorative, protective layer, as done with ETICS/ EIFS.
TIR (thermal insulation render) is a breathable, strong, incombustible mineral insulation mortar containing lightweight and insulating fillers used to substitute foam or mineral wool insulation. It can be spray-applied, even in and onto hollow bricks, making a single-layer wall.
Components of the Sika® Thermal Insulation Mortar System (ETICS/ EIFS) for Facades
Sika ThermoCoat® & Sikatherm® are a full exterior thermal insulation composite system (ETICS), consisting of high quality products, carefully tested and compatible with each other.
- One-component cementitious adhesive
- Expanded polystyrene (EPS) or mineral wool insulation boards
- One-component cementitious mortar for leveling and embedding the fiberglass mesh reinforcement
- Pigmented organic primer
- Protective, decorative organic finish (e.g. acrylic, silicone, silicate)
- Profiles and anchors to support and protect the installation of ETICS/ EIFS
Your home or building may be in need of facade renovation, especially if it is showing severe symptoms such as damp patches on the bottom of the facade, structural damage, bad musty smells inside or even mold and bugs. Old facade renders often erode due to freeze-thaw cycles over the years. Our brand for Renovation mortars is SikaMur®.
Sika offers an extensive product range of repair mortars, Sikagard® cleaning and protection solutions which are biodegradable and can combat efflorescence, salts, cement residues, green growth, graffiti and for hydrophobic impregnations or general purpose cleaning.
Sika also has a range of cement free SikaMur® facade mortars especially suitable for historical, heritage building rehabilitation, based on lime.
Facade Paints and Coatings
Sika offers a wide range of paints and finishing coats for your facade system.
Decorative finish SikaWall® & SikaMur® color paints are highly breathable, protective water-repellent coatings which come in an array of colors.
Organic protective and decorative SikaWall® & Sika ThermoCoat® thin-layer renders can be applied to finish a thin or thick layer render system or on top of ETICS/ EIFS systems, and also come in an array of colors.
Typical Application Methods for Facade Renders
- Traditional way of preparing mortars by mixing sand, cement and water on site
- No control over the ratio of sand, cement and water being mixed – every mix is different, no consistency of quality
- Transported to application area by wheelbarrow
- No quality control on used materials – can contain inferior raw materials
- Dust, cement, mud and dirt pollutes surrounding ground, streets and air, creating an unhealthy environment for the construction workers
- Every mix is equal with high quality consistency
- Hand or continuous mixer application with basic automation
- Increased efficiency by 200% compared to traditional jobsite mixing
- Every mix is equal with high quality consistency
- Continuous mixer and spray application with high level automation
- Increased efficiency by 400% compared to traditional jobsite mixing
- Fully automated mixing of mortar and water – every mix is equal with high quality consistency
- Spray application with high level automation
- Increased efficiency by 600% compared to traditional jobsite mixing
Sika’s Experts Provide Assistance to Benefit your Business
Contact a Sika expert near you for technical support and locally available products and systems.
Contact Sika's global representative in case you need our support in an international project.