Hein A. Timmerman, Global Sector Specialist Food Care at Sealed Air and EHEDG* Board Member, comments on protocols and procedures for keeping floors in food and beverage plants as sanitary and safe as possible.
Different Cleaning Methods, Same Goal
The cleaning of floors in the food industry differs from site to site, and from process to process. Regardless, the goal is the same - to maximize hygiene and minimize food infection risks.
According to Hein A. Timmerman, water is one of the main culprits in a plant, particularly in a dry processing scenario. “It is known that water is a potential vector for spreading Listeria and creating the possibility of it being transferred onto product,” he notes. “For this reason, it’s important to keep the environment as dry as possible.”
He goes on to say that maintenance workers should avoid using hoses, but this is not always possible given how certain plants are laid out and how they function. “Break time cleaning should be carried out manually using buckets and cloths and sanitary wipes, rather than by pouring water over the production lines.”
In dry food processing environments, floor cleaning is usually carried out by brushing and vacuum cleaning. Periodically, wet cleaning is needed but should be done with great care to ensure all residual cleaning water is fully drained, and the floor is allowed to air dry.
“Often in facilities that produce high risk foods, there are no drains at all. In these cases, powerful disinfectants are used that can evaporate quickly and that have a specified non-rinse claim. An example is the alcohol-based Diversey™ Divodes FG VT29.”
Cleaning in Wet Food Processing Areas
Timmerman explains that in wet food processing areas, cleaning will be affected by the available cleaning equipment and how the process equipment is configured. “That’s because most of the time, floors are cleaned together with the external surfaces of the machines,” he says. “Foam is often used and is applied to all external surfaces. At the same time, adjacent floors are cleaned with the same chemistry.”
The chemistry he’s talking about is usually an alkaline foam with sequestrants or a chlorinated alkaline product. Periodically, workers apply formulations based on phosphoric acids. “The contact time lasts around 10 to 20 minutes, giving workers time to use brushes to scrub away stubborn soils. The foams are then rinsed with pressurized water at around 20 bar and with a flow rate of 30 – 35 l/m for each rinse hose.”
Drains, notes Timmerman, are not cleaned at intervals like the rest of the plant, but are cleaned continuously using available equipment and cleaning products. Disinfectants based on quaternary ammonium and amphoterics are particularly noteworthy, because they greatly help prevent Listeria.
Clean-in-Place (CIP) Areas
Clean-in-place (CIP) is a method of cleaning equipment where dismantling and operator or manual involvement are kept to a minimum. It is typically used in the food and beverage industry, which requires frequent internal cleaning of equipment and processes to main high levels of hygiene.
Timmerman says such areas as the CIP room, place the greatest demand on resistant flooring. “That’s because a CIP installation uses strong chemistry as a basic material — products contain concentrated sodium hydroxide or potassium hydroxide up to 50%, nitric acid up to 62%, and the list goes on.” That list includes oxidative chemicals such as neat peracetic acid and sodium hypochlorite.
In CIP environments, temperatures can reach up to 80°C in storage vessels. “The risk of spills is high,” explains Timmerman, “but generally controlled cleaning floods are released over the flooring materials and then exit through available drains. In automated process areas, certain valves will have specific sequences to release high flows of diluted cleaning liquids onto the production floor during designated cleaning cycles.” He says other non-production areas are often cleaned with scrubber driers.
Though cleaning of floors may differ from one plant to the next, the one thing that remains common is the suitability and effectiveness of the cleaning chemistry. This even goes down to the level of dyes and odorizing elements — they’re not allowed.
The Right Floor from the Start
At Sika, we can help you get the right floor systems and products installed properly from the start. Please don’t hesitate to contact us.
In addition to making your project happen on time and in budget, we’re available at any time to answer any questions you may have.
* The European Hygienic Engineering & Design Group (EHEDG) is a consortium of equipment manufacturers, food industries, research institutes, and public health authorities. It was founded in 1989 with the aim to promote hygiene during the processing and packing of food products.
The principal goal of EHEDG is the promotion of safe food by improving hygienic engineering and design in all aspects of food manufacture. EHEDG has published Guideline 44 called “Hygienic Principles for Food Factories (2014),” which contains a chapter on hygienic flooring. Guideline 44 puts forward a number of critical points that are crucial in assuring a high hygiene level in all areas of a plant, particularly high care areas, such as clean rooms.