Benefits and Advantages
No demolition or disposal of existing base required
For exterior and interior use
Can be applied over damp surfaces or even in winter
Rainproof right away
Available in two versions: heat-adhesive and self-adhesive
Tiles can be placed directly onto the membrane (select products)
SikaShield® - An Adaptable Solution
SikaShield® bitumen membranes can be used for areas with high moisture levels or for the renovation of terraces and balconies which could still have water trapped.
SikaShield® VMS can also be included in other systems beyond bitumen, such as Sika liquid-applied membranes (Sikalastic®) and single-ply membranes (Sarnafil®), guaranteeing a safer roof refurbishment.
Here are a few typical build-ups.
SikaShield® BS type is a vapor control layer with strips on both sides to bond thermal insulation boards without special adhesives.
SikaShield® with a smooth surface ensures a full bond with the overlapping layer. It can be used as a vapor control layer or as a waterproofing membrane.
SikaShield® MG type with mineral granules acts as a base for laying ceramic tiles or cement mortar. It is especially suitable for balconies and terraces in either renovation projects or new buildings.
SikaShield® VMS for Roof Renovation
SikaShield® VMS is a bituminous membrane with strips on the underside to diffuse any water vapor and prevent blistering. The strips, which cover around 40% of the membrane surface, guarantee better adhesion and consequently higher wind resistance. The remaining 60% is not glued, which creates free space for improved diffusion of water vapor and prevention of bubble formation from residual moisture. It is available in both torch and self-adhesive versions.
Contact a Sika expert near you to see if this product is available locally.