Electronics manufacturing plants demand precise environmental control, reliable performance, and long-term operational resilience. Owners and project teams must protect sensitive components, maintain clean and dry production environments, support worker safety, and meet demanding sustainability and compliance goals, while keeping construction and refurbishment projects on schedule and on budget.
Your Trusted Partner
As a single, reliable partner with worldwide expertise in advanced manufacturing environments, Sika helps simplify the construction and maintenance of electronics manufacturing plants through tailored technical guidance, proven system solutions, and structured project support.
We offer a comprehensive portfolio of high-performance construction solutions designed for advanced manufacturing facilities – from sustainable concrete technologies and conductive flooring systems to dust-resistant coatings and high-performance roof waterproofing solutions.
Challenges in Construction & Refurbishment
At Sika, we understand the precision, contamination control, and
operational reliability requirements involved in electronics manufacturing
plant construction and maintenance. From electrostatic discharge
protection to clean and dry production environments, every detail matters — and we’re here to help you get it right.
Trusted by manufacturers, facility owners, design consultants, and contractors worldwide, Sika helps ensure electronics production facilities perform reliably over time: protecting sensitive equipment, enabling efficient operations, and optimizing total lifecycle costs.
Worker
safety
Electronics manufacturing facilities must protect both workers and highly sensitive production environments. At the same time, strict safety standards, regulatory requirements, and sustainability goals must be managed while staying ahead in a fast-evolving technological and environmental landscape.
By integrating robust materials, smart systems, and sustainable design and construction, manufacturers can create facilities that safeguard the workforce while supporting reliable production and long-term compliance.
Sensitive
components
Electronic components are highly vulnerable to electrostatic discharge, contamination, chemical exposure, and physical damage. Maintaining product quality therefore requires strict environmental controls and carefully designed production spaces.
Cleanrooms, controlled humidity levels, and electrostatic conductive flooring systems help protect sensitive components and ensure stable production conditions, supporting consistent quality and uninterrupted operations.
Regulatory
compliance
Rapid technological advances and evolving global demand mean electronics manufacturers must design facilities that can adapt to changing production needs.
Future-ready facilities incorporate modular design, smart monitoring technologies, and sustainable infrastructure that allow manufacturers to scale operations, improve efficiency, and maintain compliance while preparing for future process changes.
Overview of Electronics Manufacturing Plant Solutions
We offer a complete range of high-performance construction solutions for electronics manufacturing plants — from roof waterproofing and hygienic interior systems to below-ground waterproofing, secondary containment, facades, and sustainable concrete technologies.
Our technical experts work closely with project teams to identify the most appropriate systems for each application, ensuring reliable performance across every area of the structure.
Because every facility has unique design and operational requirements, tailored technical guidance is essential. Explore the solutions below to learn more.
1. Roofing
Sensitive production areas need protection from environmental exposure and energy loss.
Sika’s sustainable roof waterproofing systems support both new construction and renovation projects. Combined with energy-efficient technologies and smart monitoring systems, our solutions help enhance total cost of ownership while reducing operational risks.
A range of compatible accessories ensures optimal system performance, supported by tailored project guidance and Sika’s global network of experienced applicators.
Sarnafil® and Sikaplan®
single-ply membrane systems
SikaShield®
bitumen membrane systems
Sikalastic®
liquid applied membrane systems
- Ideal for lightweight roof structures
- Suitable for complex geometry and detailing with liquid-applied membranes in combination with single-ply and bitumen systems
- Long life expectancy
- High impact resistance
- Sustainable
- Liquid-applied membranes for roof refurbishment
Sarnafil® and Sikaplan®
FPO and PVC systems
SikaShield®
bitumen systems
Sikalastic®
liquid applied membrane systems
- Roof covering is protected against UV, fire risk and physical damage
- Extends the life of the roof assembly
- Reduced maintenance
Sarnafil®
FPO and PVC systems
Sikalastic®
liquid applied membrane systems
- Quantifiable savings in energy costs
- Extends the life of the roof structure
- Sustainable
- LEED credits
Sika SolaRoof®
comprehensive solar roof solution
SikaRoof® Anchor System
photovoltaic anchoring system
SikaRoof® Solar Mount-2 (SSM2)
photovoltaic mounting system
- Simple and fast installation
- Sika® Solar Mount eliminates penetrations through the waterproofing
- SolaRoof® Anchor provides a robust weathering of the fixings
- Eliminate “sliding” of the PV frames which can cause damage to the waterproofing
- Lightweight
- Tested systems
- Compatible with all Sika roofing technologies
SikaRoof® Control
monitoring / leak detection systems
- Easy to install
- Low cost, high value system
- Continuous monitoring of the roof assembly
- Rapid alert in the event of potential leaks
- Pinpoints area of concern to enable rapid response and remedial action if needed
- Assists planned maintenance programs
- Peace of mind
Sarnafil® and Sikaplan®
single-ply membrane systems
SikaShield®
bitumen membrane systems
Sikalastic®
liquid applied membrane systems
- Sustainable and visually more appealing
- Slows down storm water flow by retaining up to 75% of rainwater, thus alleviating the pressure on storm water and drainage infrastructure
- Reduces building’s cooling energy consumption and costs, particularly in warmer months due to thermal mass effect of the green roof
- Extends lifespan of the waterproofing membrane by protecting it from damaging UV rays and freeze-thaw cycles
2. Flooring & Wall Systems
Hygienic environments are critical to protect product quality and equipment.
Sika provides industry-compliant flooring and wall systems designed for hygienic, high-performance electronics manufacturing environments. Compatible flooring, wall, coving, and joint systems create seamless, easy-to-maintain surfaces that support contamination control and long-term durability.
Low-VOC and reduced-CO₂ solutions support sustainability goals, while oxirane-free technologies help meet evolving regulations. Fast-curing systems also minimize downtime during maintenance or shutdown work.
Sika® Ucrete®
Sikafloor® MultiDur
Sikafloor® DecoDur
Sika® ComfortFloor®
- Designed for controlled environments such as pharmaceutical production areas, laboratories, and other areas where hygiene, contamination control, and safety are critical
- Ensuring regulatory compliance (GMP, FDA, ISO cleanroom standards)
- Prevent contamination
- Typically seamless, non-porous, mechanical and chemical-resistant
- Prevents electrostatic discharge in sensitive areas
- Slip resistance – ensures worker safety
- Low VOC and emission levels
- Electrostatically conductive (EN63140/ EN 1081), if required
Sikagard® Wallcoat
- GMP compliant
- Biological resistance
- Hygienic
- Resistance to chemical and disinfectants
- Low VOC
Cleanroom joint sealants must be non-contaminating, durable, and resistant to microbes, with strong adhesion, flexibility, low VOCs, and chemical, mildew, and aging resistance.
Sikaflex® PRO-3 Purform®
- GMP or ISO 14644 compliant
- Biological resistance
- Resistant to disinfectants
- Good chemical resistance
- Excellent adhesion
- Odorless
- Low VOC
Sika® Ucrete®
Sikafloor® MultiDur
Sikafloor® DecoDur
- Slip resistance
- Resistant to bacterial or mold growth
- Resistance to abrasion, specific chemicals and temperature
- Tolerant to substrates with high moisture content
- Slip resistance – ensures worker safety
- Very low VOC emission
- Electrostatically conductive (EN63140/ EN 1081), if required
Sikafloor® CreamPolish CS-31
Sikafloor® Terrazzo CS-32
- Decorative and economic surface solution with high mechanical and wear resistance
- Patented multi-layer dry shake application
- Grind and polished after 7 – 10 days
- Decorative finish, exposing only the finest particles of aggregate
- Low dust
- Cost-effective
- Low maintenance
Sika® ComfortFloor®
Sikafloor® DecoDur
Sikafloor® Terrazzo
Sikafloor® DecoCem
- Decorative and seamless
- Good mechanical and wear resistance
- Slip resistance
- Low emission
- Low maintenance
3. Basement & Sub-Structure Waterproofing
Water ingress can compromise structural integrity and disrupt critical operations.
Sika provides complete waterproofing systems designed to protect basements and sub-structures from water and gas ingress. Our integrated solutions safeguard the entire structure, extending service life while supporting durability and reliability.
Low-CO₂ solutions also help reduce environmental impact while lowering total cost of ownership.
SikaProof® A+ and SikaProof®-808
fully-bonded sheet membranes
SikaShield®
wet-bonded, self-adhered or torch-applied bitumen membranes
SikaInject®
repair systems
Watertight concrete system with Sika admixtures
- Well-protected below-ground structures prevents damaging water ingress as well as protection against aggressive ground contaminants, radon and ground gases.
Sikadur-Combiflex® system
surface-mounted joint and crack sealing system based on tapes and adhesives
Sika® Waterbar® FB-125
fully-bonded flexible TPO waterstop
- Waterproofing
- Chemical-resistant joint sealants
- Joint sealing systems for construction, expansion and connection joints as well as for cracks
- Compatible with below-ground waterproofing membranes
- Durable and long-term solution
4. Secondary Containment
Chemical spills can threaten environmental safety and regulatory compliance.
Sika provides crack-bridging, chemical-resistant containment systems designed to prevent the leakage of hazardous substances.
Our solutions can upgrade and extend the service life of existing bunds and are suitable for both concrete and steel substrates in open or enclosed environments, helping protect facilities while supporting environmental compliance.
Sikaflex® polyurethane sealants
SikaTank® polysulfide sealants
- Resistance to organic acids, chemicals and abrasion
- Excellent durability
- High tear resistance
Sikalastic® polyurea waterproofing coatings
- Chemical and abrasion resistance
- Excellent durability
- Very high crack bridging
- Short downtime
- Compliant to EN 1504-2 and EN 13813
Sikagard®-7000 CR powered by the unique Xolutec® technology
- High chemical resistance and abrasion resistance
- Excellent durability
- Moisture tolerance
- Very low VOC and odor
- Short downtime
- Crack bridging
- Application temperature from 5° C to 35° C
5. Facades & External Envelope
The building envelope plays a critical role in protecting facilities from moisture and energy loss.
Sika provides high-performance facade and building envelope solutions designed to reduce the risk of water ingress and maintain dry, controlled indoor environments.
Our systems help extend the service life of existing buildings while improving energy efficiency. Digital visualization tools also support design teams in selecting and visualizing facade finishes.
A full range of silicone, polyurethane and hybrid sealants
- Durable, UV resistant and non-staining sealants keep joints, gaps and cracks weathertight in all conditions
Sika Emseal
fire-rated, movement and expansion joint solutions
- Continuous, watertight sealing systems with factory-fabricated transitions, intersections and changes in direction and plane
Range of passive fire protection systems
- Limits the spread of fire by containing it in a single compartment in its area of origin
- Provides vital escape time for people during fire incidents
- Protects escape routes, building structure and critical structural members
- Minimizes costs to rebuild after the fire
- Protects owners’ built assets
6. Concrete
High-quality concrete is essential for long-lasting manufacturing facilities.
Sika provides advanced concrete technologies designed to enhance durability and performance in both new and existing structures.
Our solutions help upgrade and extend the service life of facilities while reducing CO₂ footprint and energy use, supporting more sustainable construction and long-term operational reliability.
Sika concrete admixtures help meet the demanding requirements of data center construction by improving the durability, impermeability, and finish quality of concrete, among other factors.
SikaGrind® cement additives are engineered to optimize cement production — enhancing efficiency, consistency, and sustainability — features that translate into tangible benefits for data center construction.
- Grinding aids: Enhance mill throughput and powder flowability, enabling energy-efficient production of high-quality cement that supports dense, durable concrete
- Strength enhancers: Boost early and long-term compressive strength without altering cement particle size—proving vital for the resilience of concrete slab floors
- Performance enhancers: Enable increased use of SCMs like slag or limestone, maintaining workability and durability while reducing CO₂ intensity — supporting eco-friendly construction
- Calcined clay / LC³ solutions: Reduce clinker content up to 70%, significantly lowering carbon footprint, while ensuring mix consistency, strength, and water demand remain ideal for smooth, easy-to-clean surfaces
Sika’s wet precast concrete solutions optimize every stage of building element production — from formwork to final placement — by using advanced PCE-based superplasticizers like ViscoCrete®, accelerators, fibers, and integral durability enhancers.
Sika’s concrete flooring solutions for data centers include slab-on-grade systems with high-performance admixtures, macro fibers, dry-shake hardeners, and curing compounds. These components create ultra-flat, durable, and low-maintenance floors that resist heavy loads and support easy-to-clean industrial environments.
Sustainably Durable & Efficient
At Sika, we understand your commitment to sustainability in the construction and maintenance of electronics facilities. Our solutions support sustainability at every stage of your facility’s lifecycle, from responsible product selection and efficient application to long-lasting performance and end of life considerations.
Whether it is low-emission flooring systems that improve air quality or energy efficient roofing that reduces overall energy consumption, we help you achieve your goals by delivering quantified sustainable benefits through reliable solutions that comply with LEED, BREEAM, Green Building, and other relevant certifications.
We carefully analyze all key sustainability aspects, including resource and material efficiency, waste reduction, durability, energy savings, health and safety, and CO2 emissions, to help you identify how to optimize your project sustainably at every step.
Sika has calculated potential sustainability savings and benefits based on a hypothetical electronics manufacturing plant with the following details:
- Surface area: 400,000 m2
- Location: Houston, Texas, USA
- Design life: 50 years
- Structure: reinforced concrete using 103,000 m³ of concrete (quantity extrapolated from the Stellantis EV Battery factory in France)
- Date of assessment: May 2026
- Sarnafil® G 410 roof membrane
- Sarnatherm® PIR insulation
- SikaProof® A+ 08/12 waterproofing membrane for radon protection
- SikaFiber® Force synthetic macrofiber for the slab on ground
- Sika Viscocrete® concrete admixtures
- Sikafloor® CreamPolish CS-31, Sikafloor® MultiDur EB-19 and Sikafloor® MultiDur ES-55 ESD flooring systems
Click on the lifecycle image to explore the projected benefits of Sika solutions throughout the lifecycle of this hypothetical electronics manufacturing facility.
Benefits Along All Lifecycle Stages
Sika solutions can contribute to total potential savings of around
68,900 tons of CO₂
throughout the lifetime of an electronics manufacturing facility, depending on the location, design, and Sika products used.
Driving Digitalization
Digital transformation is reshaping how electronics facilities are planned, built, and maintained. Sika supports this evolution with a comprehensive portfolio of advanced digital tools through SikaVision® — helping you monitor, collaborate, optimize, and predict key aspects of your construction or refurbishment projects.
Sika understands the complexity of decision-making across the project lifecycle and the importance of minimizing risk at every stage. Our technologies and experts provide reliable data for your BIM models, enabling smarter collaboration and informed decisions in your virtual design and planning environments.
Contact Us
Local Contact
Contact a Sika expert near you for technical support and locally available products and systems.
Global Project Support
Sika’s Project Support Team provides in-depth consultative support for our full product range and represents a single point of contact into the extensive Sika network of experts. Please contact us to learn more or inquire specifically on your current project(s).
